Electrolux EWF 14112, Руководство пользователя

Страница: 9 / 100

3.10 Prewash Touchpad ( )
ENGLISH 9
Select this option if you wish your
laundry to be pre-washed before
the main wash. Use this option for
heavy soil.
The indicator of this option comes
on.
When selecting this option the
laundry is gently washed and spun
to avoid creasing. In this way
ironing is easier.
3.11 Easy Iron Touchpad ( )
The indicator of this option comes
on.
Select this option to add
approximately 60 minutes of
tumbling in vapour during the wash
cycle. Vapour helps open fabric
fibers up to allow laundry additives
to release tough stains.
3.12 Vapour Touchpad ( )
3.13 Start/Pause Touchpad ( )
The indicator of this option comes
on.
Vapour may not necessarily be
visible inside the drum during a
vapour wash cycle. Vapour is
created below the drum and
allowed to naturally rise into the
clothes.
At the end of the Vapour cycle
the clothes will be warmer,
softer and detached from the
drum.
To start the selected program,
press the ‘Start/Pause’.
To interrupt a program which is
running, press the ‘Start/Pause’
to pause the machine.
To restart the program from the
point at which it was interrupted,
press the ‘Start/Pause’ again.
If you have chosen a delayed
start, after pressing ‘Start/Pause’
the machine will begin the
countdown.
If Vapour option is selected,
rinse temperatures will be
elevated.
During a vapour cycle you
may notice vapour exiting
from the drain hose of the
washing machine, this is
normal and there is no cause
for alarm.
Vapour may not be present during
the entire vapour wash cycle.
Vapour function is more effective
with half load.
NOTE:
When you set this function, put
the detergent into the “ ”
compartment. (Refer page 15-16)
This function increases the
program duration.
3.14
Buzzer Sounds
The program is completed.
The appliance has a malfunction.
The buzzer sounds operate when:
If you want to disable the buzzer
sound (except for event of appliance
malfunction), press “Rinse +” and
“Vapour” touchpads at the same
time for 3 seconds, and listen for
“BEEP
,
BEEP”.
To return to default configuration
press these 2 touchpads at the
same time for 3 seconds, and listen
for “BEEP”.