36
3
The special spanner (E) and the plug caps
(D) (2 ea.) and G (1 ea.) are supplied with the
unit.
3.
Unscrew the two screws (A) using the special
spanner (E).
4.
Unscrew the four screws (B) using the special
spanner (E)
5.
Remove the transport rail (C).
6.
Screw the four screws (B) back in.
7.
Close off the two large holes with the plug caps
(D).
Attention!
Push in the plug caps so firmly that
they engage in the rear panel (this protects the
inside of the unit against splash water).
8.
Remove the screw (F), including the compression
spring with the special spanner (E).
9.
Close off the hole with the plug cap (G).
Attention!
Push in the plug cap so firmly that it
engages in the rear panel (this protects the inside
of the unit against splash water).
Prepare the Installation Location
•
The installation surface must be clean, dry and
free of floor wax residue and other lubricating
coatings so that the unit does not slide away. Do
not use any lubricants as sliding aids.
•
It is not recommended to set up the washing
machine on deep-pile carpets or on floor cover-
ings with soft foam underlays, as this would mean
that the stability of the unit would not be guaran-
teed.
•
Use ordinary rubber mats as underlays in loca-
tions with small-format tiles.
•
Never use wood, card or similar underlays to
compensate for minor floor unevenness. Always
use the adjustable screw-type feet of the
machine.
•
If, for reasons of space, it is not possible to avoid
setting up the unit next to a gas cooker or coal
stove: Insert a thermally-insulating panel between
the washing machine and the cooker (85 x 57cm).
This panel must have an aluminium foil on the
side against the cooker.
•
The washing machine must not be set up in a
room where there is a danger of frost. Frost dam-
age!
•
The intake and drainage hoses must not be bent
or pinched.
Содержание EWF 1386
Страница 1: ...W a s h i n g M a c h i n e User Information EWF 1386 822 943 036 01 17 01 02 01 g ...
Страница 44: ......