35
Setting Up the Unit
3
Washing machines with curved panels are
not suitable for substructures
.
Transporting the Unit
Unit
•
Do not place the washing machine on its front
side or on its right side (looking from the front).
Otherwise the electrical components can get wet.
•
Never transport the unit without using the trans-
port safeguard. Do not remove the transport safe-
guard until you reach the installation site.
Transporting the unit without the transport safe-
guard can result in damage to the unit.
•
Never lift the unit by the open filling door or by its
base.
When transporting the unit with a sack
trolley:
•
Attach the sack trolley only at the side. The scoop
of the sack trolley must not be longer than 24cm,
otherwise the float switch can be destroyed.
Remove the Transport Safeguard
Attention!
It is essential to remove the transport
safeguard before putting the unit into operation!
Keep all parts of the transport safeguard in a safe
place for possible later transport (moving house).
1.
Open both hose holders on the rear of the unit
and remove the hoses and the mains cable.
2.
Firmly pull both hose holders off the unit.
Содержание EWF 1386
Страница 1: ...W a s h i n g M a c h i n e User Information EWF 1386 822 943 036 01 17 01 02 01 g ...
Страница 44: ......
