Electrolux ESF65050, Руководство пользователя

Страница: 12 / 24

To activate the multitab function:
• Press the multitab button. The multitab
indicator light comes on.
To deactivate the multitab function:
• Press the multitab button. The multitab
indicator light goes off.
Do these steps if the drying results
are not satisfactory:
1. Fill the rinse aid dispenser with
rinse aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to position
2.
• You can only activate or deactivate
the rinse aid dispenser when the
multitab function is activated.
To activate/deactivate the rinse aid dis-
penser:
The appliance must be switched off.
1. Turn the programme knob counter-
clockwise until the programme marker
agrees with the second washing pro-
gramme on the control panel.
2. The digital display shows the current
setting for the rinse aid dispenser.
Rinse aid dispenser
deactivated
Rinse aid dispenser
activated
3. Press the start/cancel button to change
the setting. The digital display shows
the new setting.
4. Turn the programme knob to the off
position to save the operation.
To use normal detergent again:
1. Deactivate the multitab function.
2. Fill the salt container and rinse aid
dispenser.
3. Adjust the water hardness setting
to the highest level.
4. Do a washing programme without
dishes.
5. Adjust the water softener to the
water hardness in your area.
6. Adjust the rinse aid dosage.
SELECT AND START A WASHING PROGRAMME
Do these steps to set and start a washing
programme:
1. Close the door.
2. Turn the programme knob to set the
washing programme. Refer to the
chapter 'Washing programmes'.
– The phase indicator light or lights for
the washing programme come on.
– The programme duration in the digi-
tal display flashes.
3. Press the start/cancel button.
– The washing programme starts auto-
matically.
– When the programme starts, only the
indicator light of the phase in pro-
gress stays on. Programme duration
is on with a static light.
When the washing programme oper-
ates, you cannot change the pro-
gramme. Cancel the washing pro-
gramme.
Warning! Only interrupt or cancel a
washing programme if necessary.
Caution! Open the door carefully. Hot
steam can come free.
Interrupting a washing programme
Open the door.
• The programme stops.
Close the door.
• The programme continues from the point
of interruption.
Cancelling a washing programme
• Press and hold the start/cancel button.
– In the digital display the time duration
of the programme flashes.
– One or more phase indicator lights are
on.
The washing programme is cancelled.
At this time you can do these steps:
1. Switch off the appliance.
2. Set a new washing programme.
Fill the detergent dispenser with deter-
gent before you set a new washing pro-
gramme.
12 electrolux