background image

3. If you use a washing programme with

prewash phase, put more detergent in
the prewash detergent compartment
(B).

A

B

4. If you use detergent tablets, put the de-

tergent tablet in the detergent dispens-
er (A).

5. Close the lid of the detergent dispens-

er. Press the lid until it locks into posi-
tion.

Different brands of detergent dissolve
in different times. Some detergent tab-
lets do not have the best cleaning re-
sults during short washing pro-
grammes. Use long washing pro-
grammes when you use detergent tab-
lets to fully remove the detergent.

MULTITAB FUNCTION

The multitab function is for combi detergent
tablets.
These tablets contain agents such as deter-
gent, rinse aid and dishwasher salt. Some
types of tablets can contain other agents.
Do a check if these tablets are applicable
for the local water hardness. Refer to the in-
structions from the manufacturer.
When you set the multitab function, it stays
on until you deactivate it.
The multitab function stops automatically
the flow of rinse aid and salt. The rinse aid

indicator light and salt indicator light are de-
activated.
The programme duration can increase if
you use the multitab function.

Activate or deactivate the multitab
function before the start of a washing
programme.
You cannot activate or deactivate the
multitab function when the programme
operates. Cancel the washing pro-
gramme, then set the programme
again.

electrolux 

11

Содержание ESF65050

























Отзывы: