background image

• Keep all detergents in a safe area. Do not

let children touch the detergents.

• Keep children away from the appliance

when the door is open.

Installation

• Make sure that the appliance is not dam-

aged because of transport. Do not con-
nect a damaged appliance. If necessary,
contact the supplier.

• Remove all packaging before first use.
• A qualified and competent person must

do the electrical installation.

• A qualified and competent person must

do the plumbing installation.

• Do not change the specifications or mod-

ify this product. Risk of injury and dam-
age to the appliance.

• Do not use the appliance:

– if the mains cable or water hoses are

damaged,

– if the control panel, worktop or plinth

area are damaged, that you can get
access to the inner side of the appli-
ance.

Contact your local Service Force Centre.

• Do not drill into the sides of the appliance

to prevent damage to hydraulic and elec-
trical components.

Warning!

 Carefully obey the

instructions for electrical and water
connections.

PRODUCT DESCRIPTION

1

Upper basket

2

Water hardness dial

3

Salt container

4

Detergent dispenser

5

Rinse aid dispenser

6

Rating plate

7

Filters

8

Lower spray arm

9

Upper spray arm

10

Worktop

electrolux 

3

Содержание ESF65050

























Отзывы: