Electrolux EKM3407, Инструкция

Страница: 6 / 16

6 www.electrolux.com
EN
CNT
COMPONENTS
A.
Motor head (tiltable)
B.
Speed selector
C.
Housing
D.
Tilt head locking button
E.
Front attachment hub
F.
Front attachment hub release button
G.
Rear attachment hub cover
H.
Attachment shaft
I.
Stainless steel bowl
J.
Bowl clamping plate
K.
Non-slip feet
L.
Power cord
M.
Wire whip
N.
Coated flat beater
O.
Coated dough hook
P.
Slicer/Shredder *
Q.
Meat grinder *
R.
Blender*
S.
Blender lid with measuring cup
* Certain models only
Picture page 2
GETTING STARTED
1
Before using your appliance for the first time: Remove all packing material such as plastics, labels,
stickers or tags that may be attached to the housing, bowls or attachments.
Clean the appliance and accessories, see instructions: “Cleaning and Care”.
2 Place the appliance on a flat surface. Push the tilt head locking button with one hand and tilt the
motor head up with the other hand. Once in up position it locks.
Caution! Ensure that the power cord is unplugged.
3 Set the speed selector to “OFF”. Place the stainless steel bowl on the bowl clamping plate. Rotate
the bowl clockwise to lock it into position.
Warning: Never operate the appliance with the wire whip, flat beater or dough hook unless the bowl
is in place.
4
Place an attachment on the attachment shaft: Align the slot at the top of the attachment with the
pin on the attachment shaft. Push attachment up and turn it counterclockwise until the pin is locked
into position. To remove attachment, move it clockwise and pull off.
5
Tilting the motor head down: Push the tilt head locking button with one hand and tilt the motor head
down with the other hand. Insert the plug in the main socket.
Warning: Keep fingers and hands away from areas with movable parts.
6
Move the speed selector from “OFF” to desired speed (1-6). Once mixing is complete, turn the
speed selector to “OFF” and unplug the appliance.
Picture page 3
7 If the appliance is unplugged and the speed selector is left in speed mode (1-6):
The appliance will not start automatically. Turn the speed selector to “OFF”, then turn it to the desired speed.
OTHER FUNCTIONS
8
Attachment hub: The appliance has with two built in multi-purpose attachment hubs, one in the
front (A) and one in the back (B). Read and carefully follow the instructions that comes with each
attachment for correct and safe use.
HOW TO USE THE MEAT GRINDER*
9
Insert the grind screw (B) into the grinder housing (A). Place the knife (C) over the square shaft at
the end of the grind screw. Place the grinding plate (D) (medium or coarse) over the knife. Tighten the
ring (E) by hand until the meat grinder is secured.
Note: Do not over tighten the ring.
10 Push down the release button for the front attachment hub to the right and remove the
attachment hub cover. Fit the power shaft of the attachment in the front attachment hub socket,