ENGLISH 21
Maintenance
Prior to any maintenance work or
changing parts, disconnect the
appliance from the gas and electricity
power sources.
Replacing the taps and
thermostat
Proceed in the following way when
replacing a tap or the thermostat:
• Remove pan supports, burner heads.
• Unscrew the burner fixing screws
1
(fig. 26).(four for ultrarapid burner and
two for the other burners)
• Remove the hob, unscrewing frontal
and rear fixing screws (
4
,
3
,
2
)
(fig. 26) which lock the hob .
• Pull out the knobs.
• Unscrew the nuts
2
of the gas
aluminium pipes and pull out the
thermocouple quick connectors
3
(fig. 28).
• Unscrew the screws
2
(fig. 27) which
lock the crosspieces.
• Unscrew the screws
1
(fig. 27) which
unite the the bridles of the taps to the
front frame.
• Make to slip the ramp toward the back
part and unscrew the screws
1
(fig. 28) in order to free the taps.
• Change seal each time a tap or a
thermostat is replaced. This will ensure
perfect retention between the tap or a
thermostat and part.
• Reassemble all the parts following the
same procedure but in the reverse
order.
2
1
2
2
Fig. 27
1
2
3
Fig. 28
Electrical connection
The electrical connection must be
carried out in accordance with the
current standards and laws in force.
Before connecting check that:
1
2
3
4
Fig. 26
