Electrolux EKC 603505, Инструкция пользователя, Страница: 29 / 80

electrolux 29
weakened and must be weakened and must be weakened and must be weakened and must be weakened and must be
replaced to prevent the
replaced to prevent the
replaced to prevent the replaced to prevent the replaced to prevent the
possibility of the panel
possibility of the panel possibility of the panel possibility of the panel possibility of the panel
shattering. Contact your local
shattering. Contact your local
shattering. Contact your local shattering. Contact your local
shattering. Contact your local
Service Centre who will be
Service Centre who will be Service Centre who will be Service Centre who will be Service Centre who will be
pleased to advise further.
pleased to advise further.
pleased to advise further. pleased to advise further.
pleased to advise further.
Models in stainless steel or Models in stainless steel or Models in stainless steel or Models in stainless steel or Models in stainless steel or
aluminium:
aluminium:
aluminium: aluminium: aluminium:
We recommend to clean the oven
door using only a wet sponge and dry it
up after cleaning with a soft cloth.
Never use steel wool, acids or
abrasive products as they can damage
the oven surface.
Clean the oven control panel
following the same precautions.
The correct operation of the oven is
ensured by a gasket placed round the
edge of the oven cavity.
• Periodically check
check
check check check the condition of
this gasket. If necessary, clean it
without using abrasive cleaning
products.
• If the gasket shows to be damaged damaged damaged damaged damaged,
call you local Service Centre. Do not
use the oven until it has been
repaired.
The oven shelves and shelf
supports
Before proceeding ensure the
oven is cool and disconnected
from the electricity supply.
To clean the oven shelves, soak in
warm soapy water and remove stub-
born marks with a well wetted soap im-
pregnated pad. Rinse well and dry with
a soft cloth. The shelf supports can be
removed for easy cleaning.
Proceed as follows:
1. remove the front screw while keeping
the shelf support in position with the
other hand (see diagram 4);
2. disengage the rear hook and take off
the shelf support. Do the same thing
on the other side of the oven (see
diagram 5);
3. once the cleaning is carried out, refit
the shelf supports following the
procedure in reverse.
Please, ensure the retaining nuts are
secure when refitting the shelf support.
The telescopic shelf supports
must not be cleaned in the
dishwasher.
When cleaning the shelf sup-
ports, take care not to remove
the lubricating grease behind
the telescopic runners. This is
meant to ensure their good
operation.
)
4
5