11
Mounting
This appliance must be installed by an
authorised person.
This appliance shall be installed in
accordance with the manufacturer's
installation instructions, local gas fitting
regulations, municipal building codes,
AS5601 (AG601) Australian Standard -
Gas Installations and any other relevant
statutory regulations.
Data label
The data label is located on the
underside of the hob next to the gas
connection. A duplicate data label is
supplied to adhere in an accessible area
next to the hob. This appliance is
suitable for Natural Gas and Universal
LPG, ensure that the available gas
supply matches the data label.
Ventilation
Ventilation must be in accordance with
AS5601 (AG601) Gas installations. In
general, the appliance should have
adequate ventilation for complete
combustion of gas, proper flueing and to
maintain temperature of immediate
surroundings within safe limits.
Location
Choose a location free of draughts and
open doors and clear of combustible
materials or other fire hazards. The
location should ensure convenience of
operation and service.
14
Use of Hose Assemblies.
If the appliance is to be installed
using a hose assembly, then
1. The hose must be AGA certified to
AS/NZS 1869 as class B or class D,
and utilised in accordance with
requirements of AS 5601
(AG 601).
2. The connection point between the
consumer piping and the hose must
be accessible with the appliance
installed.
Electrical Connection
This appliance is supplied with an
1800mm long flexible supply lead
and 3 pin plug. The point of
connection is located at the rear and
on the underside of the appliance.
Connect the appliance to a readily
accessible switched general purpose
outlet which is adjacent to the
appliance.
THIS APPLIANCE MUST BE
CONNECTED TO AN EARTHED
GENERAL PURPOSE OUTLET.
