Electrolux EHS 6651 P, Инструкция по установке и эксплуатации

Страница: 33 / 42

35
Electrical connection
Before connecting, check that the nominal voltage
of the appliance, that is the voltage stated on the
rating plate, corresponds to the available supply
voltage. The rating plate is located on the lower
casing of the hob.
The heating element voltage is AC230V~. The
appliance also works perfectly on older networks
with AC220V~ .
The hob is to be connected to the mains using a
device that allows the appliance to be
disconnected from the mains at all poles with a
contact opening width of at least 3 mm, e.g.,
automatic line protecting cut-out, earth leakage
trips or fuse.
A type H05VV-F cable or one with a higher grade
must be used as the mains connecting cable.
The connection must be carried out as shown in
the diagram. The connecting links should be fitted
according to the appropriate connecting diagram.
The earth lead is connected to terminal
. The
earth lead must be longer than leads carrying
electric current.
The cable connections must be made in
accordance with the regulations and the
terminal screws tightened securely as
required.
Finally, the connecting cable is to be secured with
the mains cable cleat and the covering closed by
pressing firmly (lock into place).
Before switching on the the first time, any
protective foils or stickers must be removed from
the glass ceramic surface.
After connecting to the mains supply,
check and make sure that all cooking
zones are ready for use by briefly
switching each on in turn at the
maximum setting.
2
3
4
1