Electrolux EHL4X, Руководство пользователя

Страница: 20 / 24

Caution! Be careful when you remove
the door from the appliance. The door
is heavy. There is a risk of injury or
damage to the appliance.
Removing the door
1. Open the door as far as it goes.
2. Fully press the clamping levers (A) on
the two door hinges.
A
A
3. Close the door until the first position
(angle approximately 45°).
45°
4. Hold the door with one hand on each
side and pull it away from the appliance
at an upwards angle.
Put the door with the outer side down
on a soft and level surface to prevent
scratches.
Installing the door
To install the door follow the procedure in
reverse.
WHAT TO DO IF…
Warning! Refer to "Safety information"
chapter.
Problem Possible cause Remedy
The cooking zone do not oper-
ate Consult the operating instructions for the built-in cooking surface
The oven does not heat up The oven is not switched on Switch on the oven
The oven does not heat up The clock is not set Set the clock
The oven does not heat up The necessary settings are not
set Control the settings
The oven does not heat up The fuse in the fuse box is re-
leased Control the fuse. If the fuse is
released more than one time,
refer to a qualified electrician.
The oven lamp does not oper-
ate The oven lamp is defective Replace the oven lamp
Steam and condensation settle
on the food and in the oven
cavity You left the dish in the oven for
too long Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
The display shows “12.00” A power cut Reset the clock
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre. The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
20 electrolux