Electrolux EHD68210P, Руководство пользователя

Страница: 12 / 20

move residues by sliding the blade over
the surface. Wipe the appliance with a
damp cloth and a little washing up liquid.
Finally,
rub the appliance dry using a
clean cloth .
2. Limescale rings, water rings, fat
splashes, shiny metallic discolorations
should be removed after the appliance
has cooled down using cleaner for glass
ceramic or stainless steel.
What to do if…
Problem Possible cause Remedy
The cooking zones cannot be
switched on or are not operating More than 10 seconds have
passed since the appliance was
switched on Switch the appliance on again
The lock is switched on Switch off the lock (See the sec-
tion “Locking/unlocking the
control panel”)
The child safety device is
switched on Deactivate child safety device
(See the section “Child safety
device”)
Several sensor fields were
touched at the same time Only touch one sensor field
Automatic switch-off has been
triggered Remove any objects (pans, etc.)
that are lying on the control pan-
el. Switch appliance on again
is active Switch off
Acoustic signal sounds when ap-
pliance is switched off The control panel is wholly or
partly covered by objects. Remove objects.
The residual heat indicator is not
displaying anything The cooking zone was only on
for a short time and is therefore
not hot If the cooking zone is supposed
to be hot, call your local Service
Force Centre.
Repeated acoustic signal (6x),
appliance switches off One or more sensor fields have
been covered for longer than 10
seconds Uncover sensor field
Acoustic signal sounds and ap-
pliance switches itself on and
then off again; after 5 seconds
another acoustic signal sounds The On/Off sensor field has
been covered up, e.g. by a cloth Do not place any objects on the
control panel
Display is switching between two
heat settings Power management is reducing
the power of this cooking zone See the section “Switching the
power function on and off”
lights up
Unsuitable cookware Use suitable cookware
No cookware on the cooking
zone Put cookware on zone
Diameter of the base of the
cookware is too small for the
cooking zone Move to smaller cooking zone
Use suitable cookware
Overheating protection for the
cooking zone has been trig-
gered Switch off the cooking zone.
Switch the cooking zone on
again
Automatic switch-off has been
triggered Switch appliance off. Switch ap-
pliance on again
12 electrolux