Electrolux EFC 9450, Руководство пользователя

Страница: 8 / 14

38
What to do if
If your appliance fails to work properly please carry out the following checks.
Symptom Solution
The cooker hood will not start... Check that: The hood is connected to the electricity supply.
Check that a fan speed has been selected
The cooker hood is not working Check that: The fan speed is set high enough for the task.
The grease filters are clean.
The kitchen is adequately vented to allow the entry of fresh air.
If set up for recirculation, check that the charcoal filter is still effective.
If set up for extraction, check that the ducting and outlets are not blocked.
The cooker hood has The safety cut-out device has been tripped.
switched off during operation... Turn off the hob and then wait for the device to reset.
If the hood has been installed below the heights indicated in the
installation instructions the motor will cut-out frequently which will
damage the hood.
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and
serial number. Please note that it will be necessary to provide proof of purchase for any in-guarantee service
calls. In-guarantee customers should ensure that the above checks have been made as the engineer will make a
charge if the fault is not a mechanical or electrical breakdown.
Special accessories*
Charcoal filter KF20 E-Nr.: 942 120 600
Remote control RM 8700 942 120 658
* Not available in UK, please contact your local Service Force Centre.
Technical assistance service
You are welcome to telephone our technical assistance service (see list of technical assistance centres)
whenever you need information or in the unlikely event of a fault.
For service in Australia call 1300 650 020.
When calling, please be ready to specify:
1. The model code number
2. The serial number (E-Nr.)
3. The manufacturing number (F-Nr.)
This information is shown on the registration plate inside the unit behind the grease filter.
We reserve the right to change specifications and colours as a result of our policy of continuing technological
development.
Technical Specifications
Dimensions (in cm):
Height
85-125
Width 89,8
Depth 42,2
Maximum absorbed power: 215 W
Motor absorption: 1 x 175 W
Lighting: 2 x 20 W
Length of the cable: 150 cm
Electrical connection: 220-240 V
We reserve the right to generate constructive and chromatic modifications as required by technological growth.