47
1
2
3
4
4
5
5
7
8
8
9
6
(5x18)
6
(5x18)
Fig. 8
Installation
Wall unit mounting - Fig. 7-8-9
Place the three rubber strips on the back of the
cooker hood.
Where necessary mount the two spacers
provided on the drill holes for definitive fixing.
The spacers are useful when the wall which is
to house the cooker hood is not perfectly
vertical (for example: where it is partially
covered with wall tiles).
Mark the wall with a centre line, this will aid
mounting procedure
(1)
, position the template so
that the mid line printed on the template
matches with the centre line previously marked,
the lower side of the template corresponds to
the lower side of the hood once mounted
(2)
.
Drill two holes Ø 8mm and fix the support
bracket with two wall plugs and screws
(3)
.
Remove the front panels (see paragraph
Removing the front panels).
Hang the hood
(4)
adjust its position
(5-6)
and
from the inside of the hood sign two points for
definitive fixing
(7)
, remove the hood and drill
two holes Ø 8mm
(8)
, fit two wall plugs, hang
the hood again and fix it securely with two
screws
(9)
. Cover the drill holes for screws
with the two screw caps provided.
Make electrical connection
(10)
, but leave the
definitive fixing
Fig. 7
spacers
rubber strips
definitive fixing
