48
10
12
SX
12
DX
11
11
Extractor version
Filter
Version
Fig. 9
1
2
hood disconnected from the home general
electric panel.
In the case that it is decided to use the cooker
hood in the suction version, then place one of
the two flanges provided in the exit hole (
11
Extractor).
The deflector (
11
Filtering version) must be
installed in the filtering version.
Attention! The tall flange should be used when
a telescopic chimney is required to be mounted
(this item should be ordered see special
accessories), the short flange is to be used in all
other cases.
Remount the grease filter and the front panels
(
12
first the right (
2
), then the left (
1
).
Connect the hood the the home general electric
panel and check if the hood work properly (
13
)
