49
a
b
c
d
a
•
Hang the hood and adjust its position trough the
2 regulating screws on right and left top of the
internal side of the hood.
•
Remove the grease filter.
•
From the inside of the hood sign 1 point for
definitive fixing.
Fig. 8
•
Remove the hood and drill 1 hole Ø 10mm on
marked point , fit 1 wall plug.
•
Hang the hood again and fix it definitively with 1
screws.
Fig. 9
•
Recirculation mode:
Insert a section of a tube, long enough to reach
the outside outlet, into discharge outlet
A
.
Fix the deflector with 2 screws to cover the
trunk of the tube.
Fig. 10
Extraction mode:
Insert a section of a tube, long enough to reach
outside, into discharge outlet
A
.
Fig. 10
•
Make electrical connection.
Fig. 8
Fig. 9
Fig. 10
F
A
A
