background image

To prevent injury to the user or other people and property damage, the following 
instructions must be followed.

Incorrect operation due to ignoring of instructions may cause harm or damage. 
The seriousness is classified by the following indications.

Safety precautions

1.  Connect with the power properly. 

Otherwise, it may cause electric 
shock or fire due to excess heat 
generation.

2.  Do not modify power cord length 

or share the outlet with other 
appliances. It may cause electric 
shock or fire due to heat 
generation.

3.  Always ensure effective earthing. 

No earthing may cause electric 
shock.

4.  Disconnect the power if strange 

sounds, smell, or smoke comes 
from it. It may cause fire and 
electric shock.

5.  Keep firearms away. It may cause 

fire.

6.  Do not operate or stop the unit by 

switching on or off the power. It 
may cause electric shock or fire 
due to heat generation.

7.  Do not operate with wet hands or 

in damp environment. It may cause 
electric shock.

8.  Do not allow water to run into 

electric parts. It may cause failure 
of machine or electric shock.

9.  Do not drink water drained from air 

The air conditioner that you have 
bought may be slightly different 
from the one illustrated in this 
manual. Please refer to the 
information related to the model 
you have. 

This air conditioner is for 
domestic use only. It is not 
reccomended for commercial or 
industrial use.

The air conditioner you have may 
carry a different plug than the one 
illustrated in this manual. The plug 
that comes with the product 
follows the electrical specification 
of the country where it is sold.

03 electrolux 

contents

safety precautions 

electrolux 04

Содержание EASC12F2MBKLW






























Отзывы: