Electrolux E32AR75FPS, Техническое и сервисное руководство

Страница: 65 / 112

6-1
Component Teardown
Component Teardown
This section explains how to access and remove components from an Electrolux ICON Built-In All Refrigerator
Pro and/or a Built-In All Freezer Pro unit, and has been arranged in such a way as to simulate which components
would need to be removed fi rst in order to gain access to other components. When following a component removal
procedure, it may be necessary to reference another component removal procedure listed earlier in this section.
NOTE: This section will cover the All Refrigerator units fi rst, the Compressor area components for All Refrigerator and
All Freezer units second, and the All Freezer components last.
Electrolux Home Products Inc. cannot be held responsible for damage to property or injury to persons
caused by failure to comply with the installation, maintenance and safety instructions contained in this
Service Manual.
- Metal edges may be sharp. Use caution and wear appropriate safety equipment when servicing
evaporators and condensers to avoid personal injury.
- If working in the compressor area, remember that compressor and tubing may be hot.
Before continuing, please take note of the WARNINGS and CAUTIONS below.
- IF IT IS NECESSARY TO REMOVE AN ALL REFRIGERATOR PRO AND/OR AN ALL FREEZER PRO UNIT
FROM ITS INSTALLATION, USE PROPER LIFTING TECHNIQUES AS UNITS ARE HEAVY AND COULD
FALL RESULTING IN SERIOUS INJURY OR DEATH. PULLING A UNIT FROM ITS INSTALLATION
SHOULD ONLY BE PERFORMED BY A TRAINED AUTHORIZED SERVICE TECHNICIAN OR INSTALLER.
- TO AVOID ELECTRIC SHOCK, POWER TO AN ALL REFRIGERATOR PRO AND/OR AN ALL FREEZER
PRO UNIT MUST BE DISCONNECTED WHENEVER ACCESSING/ REMOVING COMPONENTS POWERED
BY ELECTRICITY OR COMPONENTS NEAR OTHER ELECTRICAL COMPONENTS.
- AFTER SERVICE IS COMPLETED, BE SURE ALL SAFETY-GROUNDING CIRCUITS ARE COMPLETE, ALL
ELECTRICAL CONNECTIONS ARE SECURE, AND ALL ACCESS PANELS ARE IN PLACE.
- IF UNIT WAS USED PRIOR TO SERVICE, THE COMPRESSOR ASSEMBLY WILL BE HOT. WEAR
PROTECTIVE GLOVES AND THE APPROPRIATE SAFETY GEAR WHEN WORKING WITH COMPRESSORS.
- IF REMOVING A DOOR FROM A UNIT, REMEMBER THAT THE DOORS ARE HEAVY. IF A DOOR WERE TO
FALL, IT COULD CAUSE SERIOUS PERSONAL INJURY.