Electrolux Professional S.p.A.
Ovens Platform Customer Support
Technical Training & Service
AOS OVENS - Service Manual
(595889300 – ENG)
2. Advanced programming
The procedure to enter in advanced programming is similar to the procedure for programming the defaults
parameters.
Switch on the oven (fig. 7).
Just after the switching on, a lamp test will take place.
After the lamp test 4 lines will appear on the cavity temperature display (fig. 8).
At this point, while the 4 lines are showed on the display, press the external service buttons (fig.9) till you
hear a beep.
At this point press the right buttons till you hear a beep (fig. 10).
Press then the left service buttons till the beep (fig. 11).
Release the button and on the temperature display you will see “P 1” while on the little display the name of
the parameter will appear (fig. 12).
With the external service buttons it is possible to scroll the list of the parameters.
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
1
1
1
File: AOS service manual (ENG).008
©Copyright 2002 by Electrolux Professional
P.5/40
