Electrolux Air-O-Chill 10GN1/1, Инструкция по установке и эксплуатации

Страница: 31 / 34

5958 992 00
EN
31
1) Press the PROGRAM button:
2) Select the required program and press the button P2 ( )
to confirm. To cancel, just return to PROGRAM mode.
3) Press the START/STOP button to start the selected program.
To exit, modify or skip phase , refer to the sections on manual
control (MANUAL).
5. SETTINGS BASIC DATA
To set or display the Basic Data, proceed as follows:
1) Switch the oven on by pressing the button
I (O - I).
2) Press the button P4.
SETTINGS
_________________________________________________________
CLOCK
LANGUAGE
COMMUNICATION
CHANGE PASSWORD
OVEN STATUS
________________________________________________________ ________________________________________________________
________________________________________________________ ________________________________________________________ ________________________________________________________
- TIME AND DATE -
• Press the button P3 ( ) to enter the CLOCK page.
CLOCK
________________________________________________________
TIME
AM * 08
MINUTES 40
DAY 14
MONTH 09
YEAR 05
FORMAT TIME AM/PM *
________________________________________________________
* 24h (hours) or
AM/PM (AM = Ante Meridiem) (PM = Post Meridiem)
4) turn knob K to increase or decrease the value
(e.g. 8:00 selected, in the morning AM of September 14 2005)
5) press the button P2 ( ) to select the other data to be modified
(going from hours to minutes)
Note:
To display the time, press the button P1 ( ) when the oven is
inactive.
- LANGUAGE -
• Press the button P2 ( ) to select the item LANGUAGE and
P3 ( ) to confirm.
• Press the button P2 ( ) again to select the required language
and P3 ( ) to confirm it (some languages are on the next page,
therefore continue after the last item on the list to change page).
LANGUAGE
________________________________________________________
ENGLISH
<<<<
ITALIANO
DEUTSH
................
.....................
..........................
________________________________________________________
ENGLISH is selected in the example.
• Press the button P4 ( ) to exit.
6. MODIFYING SET PARAMETERS
With the cooking cycle stopped , started or stored , operate the
relevant controls to modify the following parameters:
MANUAL
1) cooking mode;
2) cooking temperature ;
3) cooking time
;
4) core probe temperature (alternatively to cooking time).
AUTOMATIC
1) Cooking level.
Note:
- When modifying the parameters of a STORED program the new
memorization will delete the previous one.
To modify the next phase during the cooking cycle with several
phases , the following operations must be carried out:
a) Press the START/STOP button to stop the cooking cycle in
progress.
b) Press the button
P2 ( ) and turn knob K to display the rel-
evant phase, modify the required values, setting them again.
c) Press the START/STOP button to resume the cycle in progress.