Electrolux Air-O-Chill 10GN1/1, Инструкция по установке и эксплуатации

Страница: 24 / 34

24
5958 992 00
EN
The GRAPHIC DISPLAY shows the COOKING IN PROGRESS
screen, giving the following information:
0:08
condition* ______________ ____
PREHEATING
Time elapsed________ ___ ____
Food CATEGORY _____
__ ____ _
PORK
Food TYPE ______________
_______
FILLET
Food LOAD ____
________ ____ _
MED
12PC 700g 3RACKS
Food STATUS __________
_______
FRESH
COOKING LEVEL _______
_________ _
P2 P4
* The operating condition during cooking can be one of the fol-
lowing:
PREHEATING (please wait)
INTRODUCE FOOD or
INTRODUCE FOOD and CORE PROBE
- Open the door and introduce the product to be cooked
Caution ! Risk of burns.
Always open the door with caution when the oven is hot.
- Close the door and press the button P4 ( )to confirm that
the food and the core probe have been introduced.
COOKING
HIGHER TEMPERATURE AT CORE ?
Turn the knob
K to increase the cooking temperature at the
core of the food.
Press the button
P2 ( ) to confirm or P3 ( ) to cancel.
65
EXTRA TEMPERATURE AT CORE?
PORK
MORE TIME ?
Turn the knob K to increase the cooking time.
Press the button P2 ( ) to confirm or P3 ( ) to cancel.
0:10
EXTRA TIME?
PORK
4) Press the button P2 ( ) and select the food status ( FRESH -
FROZEN) with knob K.
MED
12PCS 25oz 3GRID
FRESH
This field is not selectable for some food types because there is only
one food condition, only FRESH or only FROZEN.
5) Press the button P2 ( ) and select the food cooking level with
knob K .
F R E S H F R E S H
F R E S H F R E S H F R E S H
FRESH
level 3 of 5__
___________
P1 P2
6) If necessary, press the button P1 ( ) to go to the previous
functions.
Note:
In MANUAL mode, to check the corresponding parameters set in
AUTOMATIC MODE, press the following button
from AUTOMATIC to the corresponding MANUAL
After entering MANUAL mode it is not possible to go back to the
AUTOMATIC mode settings, therefore a new setting must be made,
whereas it is possible to modify the corresponding set parameters
and start cooking.
4.3.2 STARTING COOKING CYCLE - AUTOMATIC
- make sure the oven door is closed;
- Press the START/STOP button (the message PREHEAT ap-
pears)
Preheating is automatic for any set cooking cycle and cannot be
skipped in the AUTOMATIC control.