Electrolux 5995502399, Руководство по обслуживанию

Страница: 20 / 173

Installation Information
2-8
To remove the refrigerator doors:
1. Trace lightly around the door’s top hinges with a
pencil. This will make reinstallation easier.
(See Figure 2-17)
2. Disconnect the harness by grasping both sides of
the connector firmly, depress the latch, and pull
apart. Remove the two (2) screws from the top
hinge. Lift the door off of the bottom hinge and set
it aside. (See Figure 2-18)
3. Detach the water tube from the connector located
behind the refrigerator and pull the tube back out to
the front of the unit. The connector releases when
you press inward on the outer sleeve while pushing
the tube toward the connector then while continuing
to hold in the sleeve, pull the tube away.
(See Figure 2-19)
4. Unscrew the three (3) lower hinge screws and hinge
if necessary.
To reinstall the right door, reverse the above steps.
Once both doors are in place, ensure they are aligned
with each other and level. Replace the top hinge
cover.
Figure 2-17.
Figure 2-18.
Water Line
Approximately 3 ft.
Press
Press
Figure 2-19.
Be sure doors are set aside in a secure position
where they cannot fall and cause personal injury,
or damage to the doors or handles.