10
Making the Gas/Electric Connection
REQUIREMENTS
Gas Supply Requirements
Check your local building codes for the proper method of installation. In the
absence of local codes, this appliance should be installed in accordance with the
National Fuel Gas Code ANSI Z223.1/NFPA 54. Be certain that the appliance being
installed is correct for the gas service being provided. Refer to the data plate
located on the bottom of the cooktop chassis.
!
WARNING
WARNING
WARNING
WARNING
WARNING
•
If the gas or electric service provided does not meet the product specifications,
do not proceed with the installation. Call the selling dealer, the gas supplier, or a
licensed electrical or plumbing contractor.
•
The grounding plug must not, under any circumstances, be cut or removed.
•
This appliance must be installed by a licensed plumber or gas fitter when
installed within the Commonwealth of Massachusetts.
IMPOR
IMPOR
IMPOR
IMPOR
IMPORT
T
T
T
TANT
ANT
ANT
ANT
ANT
•
All gas cooktops have the gas and electrical located in the back right corner as
you face the front of the appliance.
•
Each cooktop ships with a factory regulator in the box. All models utilize 1/2”
regulators.
IMPOR
IMPOR
IMPOR
IMPOR
IMPORT
T
T
T
TANT
ANT
ANT
ANT
ANT
•
No adjustment of burner settings is required. All valves and air mixture shutters
found in this appliance have been factory preset for natural gas.
•
An LP Conversion Kit is included with this product. Do not use any other
conversion method or components other than the kit enclosed.
