- 11 -
TSE-N 01.01 A. B.
599 50 86 62EN
4.1.2 Thermostat
Fig. Temperature values
Fig. Thermostat
The hot plates are controlled via the bimetallic contact P 1-2. The input voltage of 230 V is applied
here.
Depending on the position of the knob, this contact determines how often the hot plate is switched
on or off during a certain unit of time by cycling the maximum heating power (230 V or 0 V between
contact 2 and 4) (refer to performance characteristic).
Continuous operation
at max. heating power is hot plate 9.
The power characteristic shows the power controller in cycling mode.
The average switching on period for each knob position can be read off in % of the cycled and/or
max. power.