Electrolux 115 V 60 Hz Washer, Руководство пользователя

Страница: 7 / 20

7
Cycle Settings
Cycle Options
Energy Saving Tips
Wash full loads. Oversize loads use extra energy. Undersized •
loads waste energy.
When small wash loads cannot be avoided, use lower
•
water levels.
Select the appropriate cycle and time for each load.
•
Shorten wash times for lightly soiled loads.
To reduce drying time, select a fast spin speed to remove
•
more water from heavy items such as towels and jeans.
Use warm water to wash most loads. Limit hot water
•
washes to heavily soiled and white loads. Use cold water
for lightly soiled items and rinsing.
Operate the washer in early morning and late evening
•
when utility demands are low.
Follow proper laundry procedures to avoid rewashing.
•
WASH-SPIN SPEED/SPEED COMBINATIONS (on select models)
Select the agitation and spin speed combination suitable
for each load. The following chart suggests wash/spin
speeds for typical wash loads.
Fabric Type
Wash/Rinse
Temperature
Heavily soiled white/colorfast cotton,
perm press Hot/Cold
Normally soiled white/colorfast cotton,
perm press Warm/Cold
Lightly soiled cottons and perm press,
noncolorfast fabrics, knits, delicates, hand
washables Cold/Cold
Washable woolens Warm/Warm
Fabric Type
Wash/Spin
Speeds
Regular/Whites Normal/Fast
Perm Press/Colors Normal/Slow
Knits Gentle/Slow
Delicates / Hand washables Gentle/Slow
Washable woolens Gentle/Slow
WATER LEVEL/LOAD SIZE
Turn the • Load Size knob to select a water level
appropriate for the load size. For best results, DO NOT
overload. Add items loosely to the tub. The dry load
should not be higher than the top of the agitator vanes.
There should be enough water in the tub for items to
move freely.
To increase the water level after the wash cycle begins, turn
•
the Load Size knob to Reset and hold. When water begins
to enter the tub, turn the knob to the desired setting.
WASH/RINSE TEMPERATURE
Turn the • Wash/Rinse Temp knob to select the wash
water temperature suitable for the fi ber content and soil
level of each load. A cold water rinse saves energy and
reduces wrinkling.
If a cold rinse is selected, the washer will fi ll with cold
•
water during rinse. If a warm rinse is selected, the washer
will fi ll with warm water during rinse.
The following chart suggests wash/rinse temperatures for
•
basic fabric types.
EXTRA RINSE (on select models)
Select Extra Rinse to automatically add an additional deep
rinse to the Regular/Whites cycle. It provides 3 minutes of
rinse agitation at the selected rinse water temperature. If
desired, add liquid fabric softener to this rinse (not the fabric
softener dispenser) or use a softener sheet in the dryer. DO
NOT pour fabric softener directly onto the load.