manualshive.com logo in svg
background image

3

Important Safety Instructions, continued

PROTECT CHILDREN

Do not allow children to play on or in the washer. Close su-

• 

pervision of children is necessary when the washer is used 
near children. As children grow, teach them the proper, 
safe use of all appliances.
Destroy the carton, plastic bag and other packing materi-

• 

als after the washer is unpacked. Children might use them 
for play. Cartons covered with rugs, bedspreads or plastic 
sheets can become airtight chambers.
Keep laundry products out of children’s reach. To prevent 

• 

personal injury, observe all warnings on product labels.
Before the washer is removed from service or discarded, 

• 

remove the washer door to prevent accidental entrapment.
Failure to comply with these warnings could result in seri-

• 

ous personal injuries.

PREVENT INJURY

To prevent shock hazard and assure stability during opera-

• 

tion, the washer must be installed and electrically grounded 
by a qualifi ed service person in accordance with local 
codes. Installation instructions are packed in the washer for 
installer’s reference. Refer to 

INSTALLATION INSTRUCTIONS

 

for detailed grounding procedures. If the washer is moved 
to a new location, have it checked and reinstalled by a 
qualifi ed service person.
To prevent personal injury or damage to the washer, the 

• 

electrical power cord of the washer must be plugged into a 
properly grounded and polarized 3-prong outlet. The third 
grounding prong must never be removed. Never ground 
the washer to a gas pipe. Do not use an extension cord or 
an adaptor plug. 
Follow package directions when using laundry products. 

• 

Incorrect usage can produce poisonous gas - resulting in 
serious injury or death.
Do not combine laundry products for use in 1 load unless 

• 

specifi ed on the label.
Do not mix chlorine bleach with ammonia or acids such as 

• 

vinegar.

Grounding type

Grounding type
wa

wall receptacl

ll receptacle

Po

Power cord with

wer cord with

3-prong 

3-prong  gr

grounded plug

ounded plug

Do not,

Do not, under

under

an

any cir

y circumstances,

cumstances,

cut,

cut, remo

remove

ve,

or b

or bypass th

ypass the

gr

grounding pr

ounding prong.

ong.

 

- FIRE/ELECTRICAL SHOCK HAZARD - 

Avoid fi re hazard or electrical shock. Do not use an adaptor 
plug or extension cord or remove grounding prong from 
electrical power cord. Failure to follow this warning can cause 
serious injury, fi re or death.

 

- HARMFUL VAPOR HAZARD - 

Do not use 

or mix liquid chlorine bleach with other household chemi-
cals such as toilet cleaners, rust removers, acid or products 
containing ammonia. These mixtures can produce dangerous 
fumes which can cause serious injury or death.

PREVENT INJURY AND DAMAGE TO THE WASHER

To prevent serious personal injury and damage to the washer:

All repairs and servicing must be performed by an autho-

• 

rized servicer unless specifi cally recommended in this Use & 
Care Guide. Use only authorized factory parts. 
Do not tamper with controls.

• 

Do not install or store the washer where it will be exposed 

• 

to the weather.
Do not install on carpet. Install washer on a solid fl oor. It 

• 

may be necessary to reinforce the fl oor to prevent vibration 
or movement.
To reduce the risk of electric shock, disconnect this appli-

• 

ance from the power supply before attempting any user 
maintenance. Turning the controls to the OFF position does 
not disconnect this appliance from the power supply.
To prevent injury, do not reach into the washer while parts 

• 

are moving. Before loading, unloading or adding items, 
push in the cycle selector knob and allow the drum to coast 
to a complete stop before reaching inside.
This washer is equipped with an electrical overload pro-

• 

tector. The motor will stop if it becomes overheated. The 
washer will automatically restart after a cool down period 
of up to 30 minutes, if the washer has not been manually 
turned off during this time.
Failure to comply with these warnings could result in seri-

• 

ous personal injuries.

Содержание 115 V 60 Hz Washer





















Отзывы: