Electrolux Professional W4 H Series, Руководство по установке

Страница: 35 / 40

Installation manual
35
Before refitting the panels, test the tilt function:
• Switch on the machine electrical switch(es) and turn on the compressed air supply.
• Open the door and lock it open.
• The uppermost switch on the tilt control unit tilts the machine either backwards (turn switch counter clockwise) or
forwards (turn switch clockwise). The middle switch returns the machine to its normal (upright) position. These
switches must be kept actuated throughout the entire tilt movement. If the switch is released, the tilt movement will
halt and the machine will stop in its position.
• The bottom switch on the control unit rotates the drum either clockwise or counter clockwise.
• Check that the machine cannot tilt in the opposite direction until it has returned to its normal position after an ear-
lier tilt.
• Check for any possible leaks from compressed air lines or from bellows and sensors.
If the test is OK, refit the machine panels/covers.
fig.6025
Fit two nut clips (D) to each corner post. The nut clips slot into the rear grooves on the posts.
D
fig.3484A