6.
5
ADDRESS FOR SERVICE REQUIREMENTS
We advise you to contact the dealer who sold you the
machine.
For any information or orders for spare parts, spe-
cify the type of machine, its serial number and the
electrical characteristics.
- The manufacturer reserves the right to modify and make im-
provements to the products without giving prior warning.
Dealer’s stamp
Date of purchase: .................................
7
T5S GB 02 2021
The machine has been designed and manufactured in
conformity with :
- The machine directive 2006/42 EEC,
- The CEM directive 2014 / 30 EU,
- 2011/65/EU Directive on the restriction of the use of certain
hazardous substances
2002/96/CEE « WEEE »
The symbol « » on the product indicates that this product
may not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the recycling
of electrical and electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling
of this product. For more detailed information about recycling
of this product, please contact the sales agent or dealer for
your product, your after-sales service, or the appropriate waste
disposal service.
2006/12/CEE “Waste”
The machine is designed so that it does not contribute, or as
little as possible, to increasing the quantity or harmfulness of the
waste and the risks of pollution.
Make sure to observe the recycling conditions.
94/62/CEE “Packaging and packaging waste”
The packaging for the machine is designed so that it does not
contribute, or as little as possible to increasing the quantity or
harmfulness of the waste and the risks of pollution.
Make sure to eliminate the various parts of the packaging in
appropriate recycling centres.
- To the European standards :
EN 13208-2000: Vegetable-peeling machines, hygiene and
safety.
This conformity is certified by:
- The CE conformity mark, attached to the machine.
- The corresponding CE declaration of conformity, associated
with the warranty.
- This instruction manual, which must be given to the
operator.
Acoustic characteristics:
- The acoustic pressure level measured in accordance with the
test code EN ISO 11201-EN ISO 3744 < 70dBA.
Protection indices as per the EN 60529-2000 standard:
- IP55 electrical controls.
- IP34 overall machine.
Integrated safety devices
- The machine has been designed and manufactured in com-
pliance with the relevant standards and regulations, mentioned
above.
- Before using the machine, the operator must be trained to use the
machine and informed of any possible residual risks (personnel
training obligation)
Food hygiene:
The machine is made from materials that conform to the following
regulations and standards:
- 1935/2004 EEC materials and objects in contact with
foodstuffs
- EN 601: cast aluminium objects in contact with foodstuffs
- Directive EN 1672-2-2005 : Prescriptions relating to hygiene
The surfaces of the food area (excluding the abrasive parts) are
smooth and easy to clean. Use detergents that are approved for
food hygiene and respect the instructions for their use.
Conformity with regulation
