Electrolux Professional Lagoon TD6-7, Руководство по установке

Страница: 41 / 44

Installation manual
41
9 At first power up
When the installation is complete and the power is connected for the first time you will be forced to make the following
settings. When one setting is ready you will automatically enter the next one.
• Select language
• Set time and date
• Activate/deactivate the service alarm
For more information about the following settings please refer to the Programming and configuration manual.
9.1 Select language
Select language from the list on the display.
This will be the language that all display messages, program names etc will be presented in.
9.2 Set time and date
Select
YES
and press the control knob to get to the menu
TIME/DATE
.
Activate the
SET TIME
menu and set the correct time.
Save the settings.
Activate the
SET DATE
menu and set the correct date. Start by setting the year.
• Set the year. Exit to continue with a long press on the control knob.
• Set the month. Exit to continue with a long press on the control knob.
• Set the day. Exit with a long press on the control knob and then save with a long press on the control knob.
Exit the menu when ready.
10 Function check
May only be carried out by qualified personnel.
A function check must be made when the installation is finished and before the machine can be ready to be used.
Whenever a repair has been made, a function check must be performed before the machine can be used again.
Check the automatic stop of the machine
• Start the machine.
• Check if the micro switches are working properly:
The machine must stop if the door is opened.
Check the direction of rotation (only on machines with 3–phase power supply, marine installation)
Demount the top panel and start a program. Check that the drum rotation is clockwise.
fig.W00200