Electrolux Professional DC6-10HP, Руководство по установке

Страница: 8 / 24

8
Installation manual
3 Master and Slave heat pumps
1
2
fig.W01396
1 MASTER
2 SLAVE
The drying cabinet contains two heat pumps, a MASTER and a SLAVE.
The heat pump on the left is the MASTER and the one on the right is the SLAVE.
As the name implies, the MASTER controls the process, while the SLAVE follows. If the SLAVE becomes inoperable,
the drying cabinet will still be able to work, but at reduced power. However, if the MASTER were to stop working, the
drying cabinet will stop. In such case, it is possible to continue the process by reconfiguring the SLAVE to temporarily
make it the MASTER. This is described in more detail in the Service Manual.
It is not normally possible to perform heat pump servicing in the field. If servicing is required, the complete units must
be removed and sent to Nimo-Verken AB, which has an exchange system for complete units.
The electrical connection is found on the connection panel of each unit. The panels face each other and are depicted
in the figure below.
3 4
fig.W01397
3 MASTER, left
4 SLAVE, right