Electrolux Professional DC6-10HP, Руководство по установке

Страница: 16 / 24

16
Installation manual
6 Positioning/Attachment
The drying cabinet is only intended for placement indoors in a dry place
The drying cabinet may not be placed in an environment where high-pressure water is used for cleaning
6.1 Ventilate the room
When the machine is in operation, the room temperature increases. Due to this, the room must have sufficient
ventilation.
All sources introducing heat into the same room requires to be considered when dimensioning the ventilation. Heat
sources could for example be: more tumble dryers, drying cabinets, washers, ironers, radiators, etc. The combination
of several sources for heat introduction leads to an increased need for ventilation flow. Other factors may also influ-
ence the needed ventilation flow, such as climate zone, building parameters, room size, etc. For assistance with di-
mensioning necessary ventilation needs, contact authorized ventilation technician.
6.2 Horizontal adjustment
The drying cabinet must stand level on a flat surface, resting on all four feet.
Adjust the feet from the outside using a hex key. Check that the top edge of the doors match and are aligned.
The adjustable feet have hexagonal grips, size 17.
fig.W01406