Electrohome EANOS502, Инструкция по эксплуатации

Страница: 14 / 42

- 14 -
OPERATION
MP3 FILES/FOLDER
During playback, repeatedly press the /+10 or FOLDER -/-10 buttons to skip the files +10 or -10.
When in the Stop mode, repeatedly press the /+10 or FOLDER-/-10 buttons on the remote to skip
to a higher or lower numbered folder (if folders are recorded onto the USB drive). During play back, press
and hold FOLDER +/+ 10 or FOLDER -/-10 to change folders.
RECORDING FROM A CD ONTO THE USB DEVICE
1. With the unit on and a USB drive inserted, rotate the AM-FM-CD-PH-AUX switch to the CD position
and insert the desired CD; playback will start automatically.
2. Select a track using the SKIP REV or FWD button. Press the RECORD button once; “rEC” will appear in
the display.
3. Press the RECORD button a second time; “rAd” (Ready) will briefly appear in the display and then
the player will restart the selected track and start recording. It will continue recording until the Stop
button is pressed.
•
• The Record indicator will blink when recording.
• Press the STOP button once to cancel the record function and twice to stop the playback.
PROGRAM RECORDING FROM A CD ONTO THE USB DEVICE
1. Perform steps 1 through 3 on page 10 to program the memory. Press the PLAY/ PAUSE button to start
program playback.
2. Select a track using the SKIP REV or FWD button, if desired. Press the RECORD button once; “rEC” will
appear in the display.
3. Press the RECORD button a second time; “rAd” (Ready) will briefly appear in the display and then
the player will restart the selected track and start recording. It will continue recording until the Stop
button is pressed.
•
• The Record indicator will blink when recording.
• Press the STOP button once to cancel the record function and twice to stop the playback.
RECORDING FROM A PHONOGRAPH ONTO THE USB DEVICE
1. With the unit on and a USB drive inserted, rotate the AM-FM-CD-PH-AUX switch to the PH position.
2. Press the RECORD button once; “rEC” will appear in the display. Press the RECORD button a second
time; “rAd” (Ready) will briefly appear in the display.
3. Place a record on the turntable and start playback. The recording from the PHONO will begin after ‘rAd’
disappears from the display.
OPERATION