www.elecro.co.uk
20
(i.e. you would like the heater to heat) this is to inform the operator that there is
an issue that needs to be resolved before heating can take place.
If the water temperature is above the set point temperature the Amber OVER
TEMP. TRIP neon indicator will not illuminate.
NO LIGHTS APPEAR ON THE HEATER WHEN IT IS SWITCHED ’ON’
Possible cause:
Power failure external to the heater
Remedy:
Check any fuses, RCD or other switch components installed in the
supply cable.
Note:
The heater is fitted with a 3 Amp glass fuse located on the top control
panel assembly (see fig 6)
RoHS Compliance Statement
Elecro Engineering Limited certify that our Electric Swimming Pool Heater
Range complies in accordance with RoHS Directive 2002/95/EC on the restriction
of hazardous substances.
Waste of Electrical / Electronic Equipment
This product complies with EU directive 2002/96/EC
Do Not dispose of this product as unsorted municipal waste.
This symbol on the product or on it’s packaging indicates that this product
should not be treated as household waste. Instead it should be handed over
to the applicable collection point for the recycling of electrical and electronic
equipment.
By ensuring this product is disposed of correctly you will
help prevent potential negative consequences for the
environment and human health, which could otherwise be
caused by inappropriate waste handling of this product.
The recycling of materials will help to conserve natural
resources.
For more information please contact your local Civic office,
your household waste disposal service or the retailer
where you purchased the product.
