www.elecro.co.uk
16
Flow Requirements
The heater should be connected to a filtration system with a minimum flow
volume of 200 litres per minute (12m
³
/h). The maximum flow volume that the
heater will operate with is 750 litres per minute (45m
³
/h). If the flow volume is
greater, a by-pass
must
be installed.
N.B the flow direction is fixed and must not be reversed.
Digital Thermostat Instructions
The digital thermostat displays the temperature in ºC
The digital thermostat fitted to your pool heater has been pre-programmed with
all the necessary parameters to ensure reliable service and operation. All you
need to do is set the temperature you would like your water to be maintained
at, this is known as the required temperature.
To display / modify the required temperature, press and release the P button.
The pre-programmed required temperature will be displayed.
Press (3) to increase or (2) to decrease the required temperature.
Item
Description
Function
1
‘P’ button
To display / modify
the required
temperature
2
‘Down’ button
To decrease the
value
3
‘Up’ button
To increase the
value
4
‘U’ button
NOT USED
5
LED-OUT
Continuously
Illuminated
If flashing
Indicates that the
digital thermostat
is calling for heat.
Indicates that the
unit is in
‘Time Delay Mode’
Fig 5.
