assembly, place the spring on the pin, insert the
pin into the hinge base and screw the knob on the
pin. Check to make sure the spring is under ten-
sion, then screw the locking nut on the end of the
pin until it is tight against the knob. For repair, use
the following kit:
Hinge Knob/Locking-Pin Repair Kit: 84982
Electro-Voice, 600 Cecil St., Buchanan, MI 49107
USA, 616-695-6831
B. X-ARRAY™ RIGGING ACCESSORIES
The following rigging accessories are available for
X-Array™ loudspeaker systems from Electro-
Voice and other manufacturers:
Grid: This ATM Fly-Ware™ “T” shaped, all-steel-
construction grid was specifically designed a
single column of X-Array™ systems. Multiple
grids can be linked together with couplers on front
and back retractable arms, the position of which
sets the splay angle between adjacent columns.
Part number MEGS-4000-T. ATM Fly-ware™,
2100 S. Wilmington Ave., Carson, CA 90810
USA, 310-834-5914
Xrhg Grid Hinge: Two Xrhg grid rigging hinges
are used to attach the rear of the top enclosure in
a column to the rear of an X-Array™-compatible
grid. Each hinge consists of two precision-ma-
chined steel rigging-track fittings connected by
an alloy-steel chain. Part number 510-2999.
Electro-Voice, 600 Cecil St., Buchanan, MI 49107
USA, 616-695-6831
Xrhp Pickup Hinge: Two Xrhp pickup rigging
hinges are used to create custom rigging assem-
blies to attach to the rear of the top enclosure in a
column when an ATM grid is not used. Each
hinge consists of one precision-machined steel
rigging-track fitting with an alloy-steel chain. Part
number 510-2999. Electro-Voice, 600 Cecil St.,
Buchanan, MI 49107 USA, 616-695-6831
Xrhl Linking Hinge: Two Xrhl linking rigging
hinges are used to link two enclosures together at
the rear. Each hinge consists of two precision-
machined steel rigging-track fittings connected by
a heavy-duty steel hinge. Part number 510-2998.
Electro-Voice, 600 Cecil St., Buchanan, MI 49107
USA, 616-695-6831
Xrsl Long Rigging Strap: Two Xrsl long rigging
straps are used at the front of two enclosures to
adjust their relative vertical angles. The Xrsl may
also be used to attach the front of the top enclo-
sure to the ATM grid when upward angles are not
required. Each all-steel strap consists of two New
Haven NH32102-2 double-stud fittings connected
by black plastic-coated wire rope. Sound Manu-
facturing Inc., 3336 Primera Ave., Hollywood, CA
90068 USA, 213-850-5042
Xrss Short Rigging Strap: Two Xrss short rig-
ging straps are used to attach the front of the top
enclosure to the ATM grid. The Xrss may also be
used at the front of two enclosures when a limited
range of vertical angles are required. The all-steel
Xrss utilizes the same construction as the Xrsl.
Sound Manufacturing Inc., 3336 Primera Ave.,
Hollywood, CA 90068 USA, 213-850-5042
New Haven NH32102-2 Fitting: The New Haven
NH32102-2 swivel-ring, double-stud fitting recom-
mended for attachment to both the front and rear
X-Array™ rigging track is available for the user to
make custom rigging attachment hardware.
Sound Manufacturing, Inc., 3336 Primera Ave.,
Hollywood, CA 90068, USA, 213-850-5042.
Custom Rigging Strap Assemblies: Custom
wire-rope rigging strap assemblies that use the
New Haven NH32102-2 fitting may be ordered.
Sound Manufacturing, Inc., 3336 Primera Ave.,
Hollywood, CA 90068, USA, 213-850-5042.
General Rigging Supplies: A wide variety of
standard and specialty rigging hardware compo-
nents for both touring and permanent-installation
applications is available. Sound Manufacturing
Inc., 3336 Primera Ave., Hollywood, CA 90068
USA, 213-850-5042 or ATM Fly-ware™, 2100 S.
Wilmington Ave., Carson, CA 90810 USA, 310-
834-5914
page 25