EVID C12.2 Ceiling Speaker Installation and Operations Manual
10
Step 5: Mount the Speaker Into the Ceiling
Push the speaker into the ceiling hole until the front baffle rim is flush with the ceiling.
Tighten the mounting tabs by turning the screw clockwise until the speaker is secure.
Please note that the first clockwise quarter turn rotates the attachment tabs outward. The
remaining turns tighten the tabs down onto the back of the ceiling surface (see Figure 12).
Figure 11:
Mount Speaker into
Ceiling
Figure 12:
Tighten Mounting Tabs
Step 6: Connect a Safety
Support Line
Note the support ring on the back of the
speaker. The ring allows for connection to
an independent and secure anchor point.
Construction codes often require the use of
this secondary support point.
Figure 13:
Attach Safety Support
Line
Installation Note: Mounting
Tabs
For each attachment screw, first turn
one half turn counterclockwise to
release the counting tab from its guide.
Installation Note:
See Figures 4a and 4b for possible installation methods. If 3/8” threaded rod is to be
used in a ceiling tile installation, the threaded rod must be installed to the threaded
rigging point before installing into the ceiling.
