EVID C12.2 Ceiling Speaker Installation and Operations Manual
11
Step 7: Adjust Tap Selector
The tap selector switch is located on the
front baffle. Adjust the speaker to the
appropriate tap setting before installing
the grille. In some 70V/100V constant
voltage installations it is advisable to leave
the grilles off if final speaker audio level
balance adjustments are to be made later.
After the levels are adjusted the grilles can
then be installed.
Step 8: Attach the Grille
Figure 14:
Adjust Tap Selector
Figure 15:
Attach the Grille
Installation Note: Grille Safety
Feature
EVID grilles features a unique safety
tether to prevent the grille from falling
if the grille is removed or comes loose
after installation.
First, install the grille’s safety tether by
pushing the grille fastener into the hole
in the front of the baffle (see Figure 15).
Second, press the grille into place until
the front of the grille is flush with the rim of
the baffle. Make sure the grille is securely
seated to prevent it from vibrating loose. If
you need to remove the grille, the easiest
way is to insert two bent paper clips or
other pointed objects into holes in the
grille, then apply slow even pressure to
pull down on the grille until that section of
the grille comes out slightly. Continue the
same procedure around the perimeter of
the grille, loosening a portion at a time until
the grille is removed.
