manualshive.com logo in svg

Electro-Sensors Electry-Sentry 1, Руководство по установке и эксплуатации

Поделиться
Скачать
Electro-Sensors Electry-Sentry 1 Скачать руководство пользователя страница 22

temperature displays.  See Troubleshooting Section, 
“Out-of-range Sensor Detection” for details.

2)  Electro-Sentry 1’s 4-digit LED speed display can show in 

‘%’ or in ‘RPM’, as per the 

Var09

 selection (as already 

discussed).  However to aid in troubleshooting , the small 
LCD display (mainly used for UserVar programming) 
can toggle between % and RPM just by pressing the 
INCREMENT button when in Normal Mode.  This LCD 
feature is independent of 

Var09

.

When displaying ‘%’ values the LCD shows the ‘OUT%’ 
icon in the upper-right-corner.
When displaying ‘RPM’ values the LCD does not show the 
‘OUT%’ icon in the upper-right-corner.

Concerning the Var34 Disable/Enable Commands:

 

If an Hour_and_Speed_Enable command is NOT present 
at 

TB34

, then none of the Speed display’s discrete Green/

Yellow/Red LEDs are enabled, nor are the speed alarms 
enabled.  However even without an Hour_and_Speed_Enable 
command present, the Speed display continues to show 
speed in % or RPM - this is so speed can be displayed on a 
ramp-down to ‘STOP’ after an Hour_and_Speed_Disable 
command has been given.

 

If an Hour_and_Speed_Enable command is present at 

TB34

 

 

AND

  if 

Var09 

has Speed Monitoring Enabled, then the 

Speed display’s discrete Green/Yellow/Red LEDs and speed 
alarms are all enabled and will activate as needed.
Note:  

Var09

 can be used to disable Speed Alarm 

Monitoring, thereby allowing the Hour_and_Speed_
Enable command to be used for starting/stopping just 
the Hour_Meter in those applications that do not use 
Speed Alarm Monitoring.  See 

Var09

 for details.

Note:  If an Hour_and_Speed_Enable command is already 

present when changing 

Var09

 ‘on-the-fly’, then the 

effects of enabling Speed Alarm Monitoring are not 
seen until after the 

Var08

 Underspeed Start Delay 

time plus the time of 

Var05

 delay or 

Var07

 delay has 

passed, after the instant 

Var09

 has been changed to 

Enable Speed Alarm Monitoring.

 

Temperature sensors and their discrete LEDs, displays, and 
alarms are always active, independent of the 

Var34 

based 

Hour_and_Speed_Disable/Enable commands.

Free Catalog and Application Assistance

1.800.328.6170

Website: www.electro-sensors.com

990-005500 Revision D

14

Содержание Electry-Sentry 1

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды