Revised November 11, 2015
LX2056 Owner's Manual
www.electro-mech.com · 800.445.7846
Page 7
Power Requirements:
•
Each LX2056 player statistics display requires one circuit providing 2.1 amps
120 VAC, 60 Hz
•
Power enters each cabinet via an attached 6-foot long cord designed to plug into
a standard (NEMA 5-15R) power receptacle.
•
The control console requires one circuit providing 0.5 amps, 120 VAC, 60 Hz via
standard (NEMA 5-15R) power receptacles.
•
Electro-Mech recommends installing a dedicated breaker to control power to the
player statistics displays.
•
All power receptacles must be properly grounded.
Mounting Requirements:
•
In its standard configuration, this scoreboard display set is designed for indoor
use, and each cabinet may be mounted on a wall or suspended from the ceiling.
•
To use the standard mounting tabs for installation on a wall, the installer must
securely attach two lag bolts, or similar hardware, with a maximum diameter of
3/8 inches. The mounting tabs are spaced 40 inches from center to center.
•
Each display cabinet may be suspended from the two eye bolts attached along
the top of the frame. These eye bolts are spaced 36 inches center-to-center and
have a 1-inch diameter opening to accept chain or cable.
Warranty Information:
•
The standard limited warranty covers factory labor on parts returned to Electro-
Mech within five years of the scoreboard's date of invoice.
•
The complete standard warranty statement is included near the end of this
document.
•
Additional support plans are available.
