Electro-mech LX2056, Руководство пользователя

Страница: 26 / 29

LX2056 Owner's Manual Revised November 11, 2015
Page 26 800.445.7846 · www.electro-mech.com
LX Drivers
The LX Driver circuit boards do the work of
interpreting data sent from the control
console to player statistics display. Using
that information, the drivers decide which of
the LEDs should be illuminated and which
should not. Each LX Driver in this system
decodes data representing a specific set of
digits used in the scoreboard. The drivers
send signals to the LED display circuit boards
via ribbon cables.
Data flows from one LX driver to the next in
order, starting at the top line of the left
(typically Guest) display. The flow of data continues down through each line of player
statistics and then over to the top of the second display. In the tables below, columns
identify the LX Drivers, listed in order, left to right, based on the data path. The table
rows give the names and purposes of the various connectors on the LX Drivers.
Left Side Stat Panel LX Drivers
Connector LX48 LX49 LX50 LX51 LX52 LX58
J2 (Data In)
From
ScoreLink
J3 (Data Out) To LX49 To LX50 To LX51 To LX52 To LX58 To LX53
J4 (Word 1 Low) 1 Player Tens 2 Player Tens 3 Player Tens 4 Player Tens 5 Player Tens 6 Player Tens
J5 (Word 1 High) 1 Player Units 2 Player Units 3 Player Units 4 Player Units 5 Player Units 6 Player Units
J6 (Word 2 Low) 1 Fouls Tens 2 Fouls Tens 3 Fouls Tens 4 Fouls Tens 5 Fouls Tens 6 Fouls Tens
J7 (DC Power In) 18.9 VDC 18.9 VDC 18.9 VDC 18.9 VDC 18.9 VDC 18.9 VDC
J8 (Word 3) 1 Fouls Units 2 Fouls Units 3 Fouls Units 4 Fouls Units 5 Fouls Units 6 Fouls Units
J9 (Word 2 High) 1 Points Tens 2 Points Tens 3 Points Tens 4 Points Tens 5 Points Tens 6 Points Tens
J10 (Word 4) 1 Points Units 2 Points Units 3 Points Units 4 Points Units 5 Points Units 6 Points Units
J15
H5/BLK (Data In)
From Data
Input Port
From LX48 From LX49 From LX50 From LX51 From LX52
H6/RED (Data In)
From Data
Input Port
From LX48 From LX49 From LX50 From LX51 From LX52
H7/SHLD (Data In)
From Data
Input Port
From LX48 From LX49 From LX50 From LX51 From LX52
Jumper Pins LX48 LX49 LX50 LX51 LX52 LX58
H13 (J4/J5 Blanking)
H16 (J4/J5 Blanking)
H14 (J6/J9 Blanking)
H17 (J6/J9 Blanking)
H15 (Blank/Stat) X X X X X X
H18 (Lamp/Stat) X X X X X X
H3 (Right Team)
H11 (Spare Shunt)
H19 (Not Used)
H1 (Memory Ret.)
H2 (Group +1) X X
H4 (Bank +2) X X
H12 (Bank +1) X X X