Electro Industries Nexus 1262, Руководство по установке и эксплуатации

Страница: 41 / 212

e
Electro Industries/GaugeTech Doc # E151701 3-7
3.6: LCD Programmable Display Setup
1. From the Communicator EXT Main
screen, click
Tools
>
Edit LCD
Programmable Settings
.
2. You will see the screen shown on the.
right.Use the tabs at the top of the
screen to navigate to different
setting screens.
3. Click the
Meter Display Mode
Names
tab.
a. Enter a three-letter label for each
of the three View Modes.
b. Enter a description for each mode
using the Line 1 and Line 2
Description fields.
4. Click the
Screen Assignments
tab.
a. Double-click on the screen you
want to change.
b. Enter up to 16 screens under
each mode on the screen. Your
Label for each mode will appear
at the top of each column.
5. Click the
Power and Energy
Display
tab.
Enter settings for Power and
Energy:
Number of Digits:
4 - 9
(Primary Power).
Decimal Point Location:
0 - 3 (Primary Power)
Display Leading Zeroes
:
check if desired.
Energy Display
: Select the
Multiply by Constant
value.
Check
Apply to the Demand
Registers as Well
if desired.
A
Preview
appears at the bottom of
the screen.