manualshive.com logo in svg

Electro Industries Nexus 1262, Руководство по установке и эксплуатации

Поделиться
Скачать
Electro Industries Nexus 1262 Скачать руководство пользователя страница 26

Electro Industries/GaugeTech 

Doc # E151701   

2-2

Figure 2.2:  How the Nexus

®

1272 Meter Processes Inputs

The digitized signals are then passed to the appropriate processor.  Real-time measurements are 

calculated in one processor and made available for meter readings and historical logs.  A separate

processor performs waveform recording.  Calculated data and logs are stored in memory for delivery to

displays, external systems and download processes.  

The meter includes a time synchronizing input port that accepts an industry standard IRIG-B signal to

synchronize meter time to standard universal time.  If there is no IRIG-B signal, the meter uses a time

synchronizing input port that uses line frequency to synchronize meter time to standard universal time.

The Line Synchronization Feature may be Enabled or Disabled.  If it is not Enabled, the Internal Clock

provides time sychronization.  All readings and logs are time stamped to the nearest millisecond.

Eight status channels provide input of status or pulse signals.  Status inputs are date/time stamped to the

nearest millisecond and placed in the event log.  Pulse inputs are multiplied by a user-supplied factor

and accumulated in reading registers.  These accumulated values can also be totalized.  This feature

makes the Nexus® 1272 meter a good fit in universal metering applications.  Any one input channel can

be selected to accept an End of Interval pulse from another meter.  

Meter set-up parameters and all historical log data are stored in nonvolatile RAM.  The user has multiple

log functionality.  Data is made available through the onboard display.  Display screens are described in

Section 2.3.3.  Several additional communication channels operate simultaneously, including the option-

al Ethernet/Modem Combo Card..  External systems can be connected to either of the RS485 ports or

the Ethernet/Modem port.  Stored data can be downloaded through the RS485 ports, the

Ethernet/Modem port or the IR port.

Содержание Nexus 1262





















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды