07/24/2007
BL001
•
Handled as the priority zone on multi-zone (EB-ZEA-1) or two
pump (EB-Z2P) controllers
•
Priority switch on, zone 1 active - TS boiler automatically changes
to 150° (or selection 176°) supply water setting
•
All other zones are held off
•
With zone 1 satisfi ed or 60-minute timeout, the boiler automatically
returns to the preset temperature and reacts to the other zones
Low Temp
High Temp
Radiant, slab
Radiant, staple up
Radiant, slab
Baseboard
Radiant, slab
Fan coil
Radiant, slab
Water heater, side arm
Radiant, slab
Hanging unit heater (garage, shop, etc.)
These installation kits provide the critical plumbing components needed for easy installation of the Electro-Boiler.
In addition
to the
items shown in the matrix below, each kit includes all necessary ball valves, drain valve, tees, elbows, nipples, bushings, couplings,
etc. for direct connection to circulator pump and/or manifold.
Electro Industries’ boilers come standard equipped with outlet temperature/pressure gauge, pressure relief safety valve, and when
applicable, the WarmFlo
TM
electronic control sensors. These kits provide the additional components for easy installation:
5585 - Mini-Boiler &
10 kW TS Series
5586 - TS Series, Standard
5578 - 3/4” Pipe
5582 - 1” Pipe
5579 - 1-1/4” Pipe
•
120V, 1/25 HP, maintenance-free wet
rotor
circulator
•
Pump curve example - 5 GPM (19 L)
@ 11 ft. of head (32.9 kPa)
•
120V, 1/6 HP, maintenance-free oil
lubricated
circulator
•
Pump curve example - 10 GPM (37.8 L)
@ 20 ft. of head (50.8 kPa)
•
Two fl anges, with isolation valve
Model
Application
Return Gauge
Expansion Tank
Air Vent
EMB-BK
All EMB Series
2.1 gal. (7.9 L), 40,000 Btu/h
Basic fl oat type
EMB-PK
All EMB Series
2.1 gal. (7.9 L), 40,000 Btu/h
Enhanced air separator, EAS
EB-PK-M
EB-MS, -MA, -MO Series
4.5 gal. (17 L), 135,000 Btu/h
Enhanced air separator, EAS
EB-BK-TS
EB-S, -WA, -WO Series
4.5 gal. (17 L), 135,000 Btu/h
Basic fl oat type
EB-PK-TS
EB-S, -WA, -WO Series
4.5 gal. (17 L), 135,000 Btu/h
Enhanced air separator, EAS
TWO SUPPLY WATER TEMPERATURE REQUIREMENT
INSTALLATION PLUMBING KITS
CIRCULATING PUMPS