Electro-Harmonix OCEANS 12 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 40

Electro-Harmonix OCEANS 12 Скачать руководство пользователя страница 16

16

To toggle

pre-reverb

SEND/RETURN, power-cycle the Oceans 12 while

holding down the FUNCTION button. If the SEND/RETURN status was

previously

post-reverb

or

OFF,

it will now be

pre-reverb.

Similarly, if the

SEND/RETURN status was previously

pre-reverb,

it will now be turned

OFF.

To toggle

post-reverb

SEND/RETURN, power-cycle the Oceans 12 while

holding down the TAILS button. If the SEND/RETURN status was
previously

pre-reverb

or

OFF,

it will now be

post-reverb.

Similarly, if the

SEND/RETURN status was previously

post-reverb,

it will now be turned

OFF.

The SEND LVL is a global parameter that will not be tracked by presets.
The configuration (pre vs. post) of the Send/Return as well as its SEND

LVL, however, are remembered across power cycles.

Turning on the Send/Return FX Loop also disables the signal-splitting

stereo control of the FUNCTION button.

If the configuration of Send/Return FX Loop is

pre-reverb

, but nothing

is inserted into the R/RETURN jack, the FX Loop connection is shorted
and the send channel connects directly to the return for regular mono

operation.

«
...
14
15
16
17
18
...
»

Содержание OCEANS 12









































Отзывы:

Нет отзывов