Electro-Harmonix OCEANS 12 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 40

Electro-Harmonix OCEANS 12 Скачать руководство пользователя страница 1

1

OCEANS 12

Multifunction Dual Stereo Reverb

Congratulations on your purchase of the Oceans 12, our dual stereo reverb tour-

de-force. Dive into uncharted sonic depths with its myriad features: two
simultaneous, independent, stereo reverb engines, series and parallel control for

the dual reverbs, 24 presets, external expression and footswitch input, and more.
Plus, with an array of new controls like Tide for stereo image alteration, Lo-fi for

diffusion reduction, infinite attenuation, send level for FX LOOPs, and split reverbs,
your customization options are nearly limitless. The Oceans 12 is the reverb pedal

to end all reverbs!

WARNING:

Your Oceans 12 comes equipped with an Electro-Harmonix 9.6DC-200BI

power supply. The Oceans 12 requires

150mA

at 9VDC with a center negative plug. Use

of the wrong adapter or a plug with the wrong polarity may damage your Oceans 12 and

void the warranty. Do not exceed 10.5VDC on the power plug. Power supplies rated for
less than 150mA will cause the Oceans 12 to act unreliably.

- FEATURES -

•

Two simultaneous, independent, stereo reverb engines

•

Series or parallel dual reverb configurations

•

12 Reverb Types per engine yield a multitude of reverb effects

•

Multiple modes available for each Reverb Type, including new modes exclusive
to the Oceans 12

•

Easy pushbutton access to extra features like reverb tails, momentary effect

mode, and alternate knob functions

•

24 presets may be saved and recalled: one preset for each Reverb Type of
each reverb engine

•

Two-in-one expression/external-footswitch jack: control any combination of
the Oceans 12

’s knobs

with an external expression pedal, or connect an

external 1-, 2- or 3-button footswitch for augmented pedal control

•

Infinite hold, 1-second global pre-delay, tap tempo for Echo reverb

•

Additional send/return signal routing option for mono setups

•

High quality buffered analog bypass and soft switching

1
2
3
...
»

Содержание OCEANS 12









































Отзывы:

Нет отзывов