ELECTRO FREEZE Soft Serve Model 30T-RMT
184952
29
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
1234567890123456
8.1 Sanitizing Instructions
(continued)
10. Turn both SELECTOR switches to
“CLEAN” and allow the beaters to run for 5
minutes. Check for leaks around the mix
transfer system, head and drain tube during
this 5 minutes. Open and close the plungers
several times during this period to sanitize
the plunger openings and o-rings.
11. Turn the SELECTOR Switches to
“OFF”.
NOTE: Some sanitizer will remain in
hoses and cylinders.
12. Drain the solution from the
cylinders by slowly pulling down on the
dispense handles. Let the MTS force all
possible sanitizer out of the freezing cylin-
ders. Some sanitizer will remain in the
hoses and cylinders.
13. Turn the MTS switches to “OFF”.
14. Remove the pickup tubes, holding
the top 6-inch portion only.
15. Remove the mix tanks and empty
any remaining sanitizer.
5. Place an empty container under the
dispensing head on the drip tray.
6. Open the air bleed plugs and
plungers.
7. Turn the MTS switches to “ON” and
allow the mix to push the remaining sani-
tizer from the freezer cylinders.
8. Close the plungers one at a time
when pure mix is coming out.
9. When mix begins coming out of the
air bleed plug openings in the bottom of the
head, close the air bleed plugs. Wait for the
MTS to fill the cylinders and shut off.
10. After the cylinders are pressurized
and the MTS has cycled off (approximately
30 seconds) turn both DAY/NIGHT switches
to “DAY” and both SELECTOR switches to
“AUTO.”
11. Allow the freezer to cycle for 15-20
minutes. Sanitize the nozzles and install on
the head. The product is now ready to
serve.
8.2 Priming
Priming the freezer removes all excess air and sanitizer from the freezing cylinder and sets
the proper overrun for the first cylinder of product.
Figure 8-1
1. Holding the top 6-inch portion only,
insert each pickup tube into a sanitized mix
tank through the small hole in the rear cover
and set both tanks in the cabinet. Slide the
boot seals down on the mix tank covers.
2. Connect each mix probe cord to a
mix probe. Insert a sanitized mix probe
through the large hole in each rear cover,
and connect the probe cord to the back of
the cabinet.
3. Fill the mix tanks with mix and
install the front cover.
4. Turn the cabinet switch to “ON” and
close the cabinet door.