Electro Cam PLUS PS-6244 Series Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 75

background image

3-22 Programming

Setpoints

Menu Path

MAIN SCREEN

to SETPOINTS

Screens

When SETPOINTS is selected, a preliminary screen specifies the program whose
setpoints will be programmed.

The active program is displayed, but any other program can be specified by using the
numeric keys or INC and DEC to choose a program, then pressing SEL to move to
setpoint programming.

Channel to Edit

Use the numeric keypad and ENT to select the channel to program.

• CHN 91 is a special channel used for shift register functions. See “Shift Register

ANDing” for details.

Setpoint Values

Use the left and right arrow keys to move between the On and Off setpoints.

• If a channel has more than one pulse, you may view the other pulses by pressing the

right cursor key when viewing the Off setpoint, or by pressing the left cursor key when
viewing the On setpoint.

• If a channel contains no pulses, the On and Off setpoints will be “0.”

• If a channel is always on, both the On and Off setpoints will be “1.”

Setpoint Use

Menu Path

MAIN SCREEN

to SETUP MENU

to SYSTEM INFO

SETPOINT

USE

Purpose

This function displays the total number of setpoint On/Off pairs, or “pulses” available for
programming, and the number of pulses that have been programmed.

Screen

The number of setpoints shown as "Used" is the sum of all pulses that are programmed
into all channels of all programs. The "Total" value is the number of pulses that can be
stored in non-volatile EEPROM memory. The difference between the two numbers is
the number of pulses available for programming.

The number of pulses programmed into all channels of all programs cannot exceed the
value displayed as Total.

There are no values that can be changed in this screen.

TOTAL: 1200
USED: 64

Total number of pulses available for programming
Number of pulses programmed into all channels
of all programs

PGM NUMBER: <

Program to view or modify

CH: 1 <EDG
ON: 90 OF: 270

Pulse mode
OFF setpoint

ON setpoint

Channel

Blank if only 1 pulse in channel

<-P-> CH:1<EDG
ON: 90 OF: 270

<-P-> indicates multiple pulses in channel

CH:1 EDG
ON: 0< OF: 0

ON and OFF setpoints both 0 if no pulses
in channel. Both 1 if channel always ON

«
...
46
47
48
49
50
...
»

Содержание PLUS PS-6244 Series












































































Отзывы:

Нет отзывов

Похожие инструкции для PLUS PS-6244 Series

SmartCell 6A000

Бренд: Cabletron Systems Страницы: 114

Бренд: Cabletron Systems Страницы: 62

CyberSWITCH CSX150

Бренд: Cabletron Systems Страницы: 49

Cabletron CyberSWITCH CSX5500

Бренд: Cabletron Systems Страницы: 729

S5560S-EI Series

Бренд: H3C Страницы: 37

OfficeConnect WX4400

Бренд: 3Com Страницы: 528

Бренд: Meridian Страницы: 16

Бренд: FS Страницы: 23

Бренд: steute Страницы: 20

Бренд: DANLERS Страницы: 2

Бренд: Sangamo Страницы: 2

Бренд: Xantech Страницы: 4

Бренд: Datavideo Страницы: 38

CT.TS005.003902

Бренд: Talkswitch Страницы: 309

Бренд: Digitronic Страницы: 24

Бренд: C4i Страницы: 7

Бренд: Contec Страницы: 38

Hi-Speed USB 4-Port Bay Hub

Бренд: SIIG Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды