Electro-Air EA-15000, Руководство по установке

Страница: 7 / 10

Electroair Acquisition Corp. IM EA-15000 Page 7 of 10
Revision 01 Prepared by: EAC 02/04/2020
2. Removal of Old Ignition Components:

Remove the existing rotary key switch.

Label all leads affixed to the rotary key switch in the process.

Save all of the parts for future reference.

If the ignition/starter switch panel is not being installed in the rotary key switch
location, plug the hole left by removing the rotary key switch as necessary.
3. Set-up & Installation of p/n: EA-15000 Ignition/Starter Switch Panel:

Review the leads corresponding to the location of the ignition/starter switch
panel.
o
Are they of the appropriate length?
o
If not, adjust in accordance with 43.13-1B Change 1 section 11-167.

Remove the material of the instrument panel in accordance with the cutout
provided. Be advised that the drawing scale is not 1:1. All dimensions are in
inches.
Figure 3: Configuration A Cutout Dimensions