Electroair Acquisition Corp.
IM EA-15000
Page 4 of 10
Revision 01
Prepared by: EAC
02/04/2020
EA-15000 Kit Description & Requirements
EA-15000 System Description & Requirements:
1. This kit replaces the rotary key switch on aircraft with an two magnetos.
2. 12V or 24V electrical system capable of 0.75A.
Other items needed:
1. Basic tools and standard aircraft hardware required for mounting EA-15000
Ignition/Starter Switch Panel.
2. Electrical tools for cutting, stripping, and terminating various wiring. Also
recommended is a good selection of cable ties for harness routing and tie-off,
and a selection of shrink tubing for covering exposed electrical connections.
EA-15000 Kit Contents
EA-15000 Kit Contents:
1. ___EA-15000 Panel with Switches
2. ___Baggie with connectors and connecting hardware
3. ___USB Drive Containing System Documents (Installation Manual, STC, ICA)
4. ___Warranty registration**
**USE THIS TO OBTAIN THE STC AUTHORIZATION LETTER**
Receiving and Acceptance Checking of EA-15000 Kit
1. Inspect the packaging for damage before acceptance from the freight carrier. If
damaged, refuse the package.
2. Open the package.
3. Inventory the contents of the package to the content listing of the package.
4. Are all of the materials there? If yes, proceed to step 5. If no, proceed to step 9.
5. Inspect the switches for broken plastic.
6. Inspect the panel for bends
7. Are all materials acceptable?
8. If yes, proceed with installation.
9. If no, contact the factory. Have the serial number of the kit available when
contacting. (factory 248-674-3433 or
)
If possible, store parts in original packaging when not in use. If not possible, wrap parts
in cushioning material and place in one location. Review above prior to reinstallation.
For latest copies of documentation, refer to
www.electroair.net
.
Approved Model Listing (AML)
Approved Flight Manual
Supplement (AFMS)
Instructions for Continued
Airworthiness (ICA)
Installation Manual (IM)
Supplemental Type Certificate
(STC)
Trouble Shooting Instructions
(TSI)
